- Dry running
-Reversibility
-Seal-less design
-New roller/hose-guide configuration

The association of rollers and hose-guides combines several
advantages : the roller rolls on the hose without damaging it,
the hose-guide increases the squeezed surface area as well
as enabling the roller to act on the hose more gradually.

The roller/hose-guide combination increases hose lifetime and
requires lower installed power as well as a smaller quantity of
lubricant.

-Abrasion resistance

The hose lining offers high resistance to abrasion.

-Preservation of product integrity
-Easy and rapid maintenance

The pump hose is fastened with clamped collars, which
facilitates pump assembly and disassembly. Since the number
of parts involved in connection is considerably reduced, the
hose replacement time is cut right back by almost 70%.

• Rollers :
  The rollers are mounted on a self-lubricating ring of
  composite material. This assembly ensures that the rollers
  will turn freely throughout
• Hose guide :
  Designed in E24 steel, the hose guide increases the
  squeezed surface area of the hose and so allows for a
  lengthened hose lifetime
• Connections :
  Clamped collars ensures greater leak-tightness under
  depression while facilitating rapid replacement of the pump
  hose
• Hoses :
  Hoses are available in three materials : natural rubber
  (NR), ethylene propylene (EPDM) and nitrile (NBR)
• Optional equipment :
  Pulsation dampers, vacuum unit (for DL55 pump only) and
  hose failure detector are available on request

The DSC series hose pumps are used in a wide range of
industries where robustness and reliability are essential :

• CHEMICAL INDUSTRY
  Transfer of high solids content effluent, liquid chalk
  
• MATERIALS INDUSTRY
  Pumping of ceramic slip, preparation and return of liquid enamels, sludge transfer from setting tanks
  
• MECHANICAL INDUSTRY
  Feeding and emptying of acidic baths, transfer of acids
  
• PAPER AND BOARD INDUSTRY
  Clay slurry transfer, pumping of waste water, glue or resin transfer
  
• FOOD AND PERSONAL CARE INDUSTRIES
  Transfer of Kieselguhr, mustard, fruit pulp, blood (slaughterhouse), brine
  
• ENVIRONMENT
  Limewash dosing, scum transfer

• Self-priming
• Dry running
• Reversibility
• Seal-less design
• Abrasion resistance
  
  The hose lining offers high resistance to abrasion
  
• Preservation of product integrit

• Rollers :
  The rollers are mounted on a self-lubricating ring of composite material. This assembly ensures that the rollers will turn freely throughout
• Connections :
  . Polypropylene inserts and steel flanges in standard
  . Stainless steel inserts and flanges available on request
  
• Hoses :
  . Hoses are reinforced by an internal synthetic lining which
  allows high-pressure duty and enhances the hose
  resistance to abrasion
  . Depending on the model chosen, three hose materials are
  available : natural rubber (NR), ethylene propylene (EPDM) and nitrile (NBR)
• Optional equipment :
  Pulsation dampers, vacuum and hose failure detector are
  available on request

The DL series pumps are designed for rugged industrial
use on a full range of industrial duties where reliability
and versatility are essential :

• CHEMICAL INDUSTRY
  Sodium aluminate transfer, liquid chalk transfe
  
• MATERIALS INDUSTRY
  Ceramic slip transfer, cement grout transfer
  
• MECHANICAL INDUSTRY
  Feeding and emptying of acidic baths, transfer of acids
  
  
• PAPER AND BOARD INDUSTRY
  Titanium dioxide slurry transfer, sludge transfer
  
• FOOD AND PERSONAL CARE INDUSTRIES
  Transfer of guts, spinaches, meat emulsion
  
• ENVIRONMENT
  Limewash dosing, scum transfer

• Self-priming
• Dry unning
• Reversibility
• Seal-less design
• Low noise levels
• Small overall dimensions (easy machine or system integration)
• Corrosion resistance
  
• Easy and low cost maintenance
  

• Stator/Rotor :
  Reinforced synthetic material (glass-filled polyoxyphenylene) for corrosion resistance
  
• Connecting sleeves :
  Easy access and disassembly for quick hose replacement
  
• Pump hose :
  . Injection-moulded hose with spine for occlusion improvement
  . Three hose materials are available : polychloroprene, thermoplastic and food grade thermoplastict

The PMA series peristaltic pumps are specially suitable for the sampling and dosing of a wide range of products :

• CHEMICAL INDUSTRY
  Pilot plants, laboratory duties, sampling of chemicals, conditioning
  
• MATERIALS INDUSTRY
  Dosing of flocculents in the mining industry, feeding spray guns with enamel
  
• MECHANICAL INDUSTRY
  Surface treatment bath regeneration, dosing of acids, effluent treatment
  
• PAPER AND BOARD INDUSTRY
  Dosing of additives, transfer of inks or glues
  
• FOOD AND PERSONAL CARE INDUSTRIES
  Dosing of yeast, preservatives, colouring agents, flavours
  
• ENVIRONMENT
  Sampling of waste water, dosing of polymers

• Self-priming
  
• Dry running
  
• Reversibility
  
• Seal-less design
  
• Corrosion resistance
  
  The pump hose is the only part in direct contact with the pumped product. This eliminates all corrosion problems associated with acidic or basic products.
  
• Easy and low cost maintenance
  
  The particularly simple connection system of the Z series pumps allows for a very quick replacement of the pump hose (pumps are never stopped more than a fifteen minutes except for yearly overhauls).
  
• Easy and fast cleaning
  
  The pump hose can be cleaned very easily due to its straight-through design. Rapid batch changes (colour, flavour, product,? can thus take place with minimal downtime, the use of sponge balls is also possible.
  
• Versatility

• Stator :
  Aluminium alloy.
  
  
• Connecting sleeves and counterflanges :
  Polypropylene (standard) or stainless steel.
  
  
• Pump hose :
  Depending on model chosen, several hose materials are available : polychloroprene, CSM, EPDM, thermoplastic, natural rubber, butyl and silicone.

The Z series peristaltic pumps, with their technical advantages, are used in many applications over a wide range of industries :

• CHEMICAL INDUSTRY
  Emptying of drums containing corrosive products, recycling and dosing of acids and bases...
  
  
• MATERIALS INDUSTRY
  Pumping of ceramic slip, preparation and re-circulation of liquid enamels...
  
  
• MECHANICAL INDUSTRY
  Emptying of used baths, transfer of acids...
  
  
• PAPER AND BOARD INDUSTRY
  Feeding of printing and gluing lines, pumping of waste water...
  
  
• FOOD AND PERSONAL CARE INDUSTRIES
  Dosing of CIP solutions, transfer of fruit juices, tomato paste, palm oil...
  
  
• ENVIRONMENT
  Dosing of lime, reagents (ferric chloride, ferric sulphate?, flocculents...