▣ Lobe Pump ▣
▽ Lobe Pump [ Albin SLP Series ]
The PCM ALBIN SLP series is a traditional tri-lobe design, robust and simple in construction. All wetted parts are in AISI 316 stainless steel
MOdel
Max 토출량
Max Pressure
㎥/Hr (GPM)
bar (psi)
ALBIN SLP
175 (700)
16 (230)
▽ Lobe Pump [ CLASSIC Series ]
Engineered for reliability and service with the minimum wear, Classic is designed for applications where a Traditional?stainless steel rotary lobe pump is still preferred option. With its robust construction, but gentle pumping action, PCM CLASSIC series can cope with a range of applications from delicate liquids to aggressive slurries
MOdel
Max 토출량
Max Pressure
㎥/Hr (GPM)
bar (psi)
CLASSIC
175 (700)
16 (230)
장 점
  • Able to handle soft solids
  • No metal-to-metal contact
  • Superior CIP/SIP capabilities
  • Low pulse flow
특 징
* Classic tri-lobe rotor
Providing efficiency with minimum product degradation. The profile gives a smooth gentle pumping action with good solids handling characteristics.

* All product wetted part in AISI 316L type stainless steel
Integral suction and discharge ports can be screwed or flanged to match installation requirements.

* Flush front cover and rotor retention device
Combined with the fully swept pump chamber, minimizes areas of product entrapment within the pump head.

* Full range of packed gland and mechanical seal available

* Precision helical gear
Synchronize rotors maintaining pump head clearances and timing. The gear design allows for the timing of the rotors to be adjusted.

* Unique position of rotor location
적용(Application)
DAIRY PRODUCTS :
Milk, Cream, Curd...
BEVERAGES :
Flavours syrups, Sweeteners, Fruit drinks...
FOODSTUFFS :
Jams, Chocolate, Syrups, Sauces, Stews...
SUGAR, STARCH AND DERIVATIVES :
HFCS, Glucose syrup, Sugar alcohol...
PAPER AND BOARD INDUSTRY :
Calcium carbonate, Optical brighteners, Bentonite...
CHEMICAL INDUSTRY :
Acids, Resins, Inorganic sulfates and hydroxides...
▽ Lobe Pump [ CONCEPT SQ Series ]
The PCM CONCEPT SQ series was designed to eliminate potential product-retaining areas in the flow path through the pump and, where required, to provide the facility for permanent sterile barriers at all product/atmosphere interfaces. Exceeding the stringent requirements of the EHEDG CIP test protocol, the PCM CONCEPT SQ series is the definitive pump for critical hygiene applications and those requiring aseptic, sterile or clean process environments.
MOdel
Max 토출량
Max Pressure
온도
㎥/Hr (GPM)
bar (psi)
(℉)
CONCEPT SQ
100 (400)
15(215)
 
장 점
  • Able to handle soft solids
  • No metal-to-metal contact
  • Superior CIP/SIP capabilities
  • Low pulse flow
특 징 (Feature)

* Unique front-loading product seal positioning
Directly behind the rotor maximizing drainage and cleaning of the seal area.
        Single, single flushed and double mechanical seals
        using controlled compression joints

* External multi-lobe rotor fixing
Multi-lobes profile to give a gentle low shear pumping action

* Self-draining
Internal corners in the flow path are radiused to minimize product retention.

* Inlet / Outlet
        Clamp, thread or flange standards
        Aseptic fitting available where barrier circulation is required

* Special designed front cover
Fitted with a controlled compression joint, allowing barrier circulation where required, whilst eliminating all the inaccessible product-retaining crevices.

* All potential entry and exit points at the product / atmosphere interfaces can be sealed with a steam or fluid barrier to ensure product integrity

*All product wetted surfaces in AISI 316L low carbon stainless steel

The PCM SQ series pumps are manufactured in accordance to 3A and FDA standards and EHEDG certified.
The European Hygienic Equipment Design Group (EHEDG) is an EEC "QUANGO" (Quasi-autonomous non-governmental organization) sponsored by many of the major food and pharmaceutical process equipment manufacturers. The EHEDG sets the safety and cleanliness standards for process plant and equipment.
The SQ pump was tested at the Campden and Chorleywood Food Research Association (CCFRA), an independent research laboratory in England.

적용(Application)
FOODSTUFFS
Baby foods, low-fat spreads...

PERSONAL CARE AND PHARMACEUTICAL INDUSTRY
Face creams, lotions, dyes and alcohol, essential oils, injectables, aqueous creams, ointments, vaccines, blood products, and sterile sugars...
▽ Lobe Pump [ ON LINE Series ]
The PCM ON-LINE series introduces radical design improvements for faster maintenance and easier more effective cleaning leading to less process down. Industrial processes therefore become more profitable because the frequency and length of production stoppages are decreased. The PCM ON-LINE series is ultra-hygienic, 3A and EHEDG approved.
MOdel
Max 토출량
Max Pressure
온도
㎥/Hr (GPM)
bar (psi)
(℉)
ON LINE
1600 (400)
15(215)
 
장 점
  • Able to handle soft solids
  • No metal-to-metal contact
  • Superior CIP/SIP capabilities
  • Low pulse flow
특 징 (Feature)

* Unique front-loading product seal positioning
Directly behind the rotor maximizing drainage and cleaning of the seal area.
        Single, single flushed and double mechanical seals
        using controlled compression joints

* External multi-lobe rotor fixing
Multi-lobes profile to give a gentle low shear pumping action

* Self-draining
Internal corners in the flow path are radiused to minimize product retention.

* Inlet / Outlet
        Clamp, thread or flange standards
        Aseptic fitting available where barrier circulation is required

* Special designed front cover
Fitted with a controlled compression joint, allowing barrier circulation where required, whilst eliminating all the inaccessible product-retaining crevices.

* All potential entry and exit points at the product / atmosphere interfaces can be sealed with a steam or fluid barrier to ensure product integrity

*All product wetted surfaces in AISI 316L low carbon stainless steel

The PCM SQ series pumps are manufactured in accordance to 3A and FDA standards and EHEDG certified.
The European Hygienic Equipment Design Group (EHEDG) is an EEC "QUANGO" (Quasi-autonomous non-governmental organization) sponsored by many of the major food and pharmaceutical process equipment manufacturers. The EHEDG sets the safety and cleanliness standards for process plant and equipment.
The SQ pump was tested at the Campden and Chorleywood Food Research Association (CCFRA), an independent research laboratory in England.

적용(Application)
DAIRY PRODUCTS
Cream, cheese, curd, butter?BR>
BEVERAGES
Flavors syrups, sweeteners, fruit drinks, alcohol, wines, fruit concentrates...
SUGAR, STARCH AND DERIVATIVES
HFCS, Glucose syrup, sugar alcohol...
FOODSTUFFS
Jams, Chocolate, Syrups, Sauces, Batters, Stews, Sausage Meats, Eggs, Fats, Soups...
PERSONAL CARE AND PHARMACEUTICAL INDUSTRY
Creams, Gels, Serums, Lotions, Shampoos, Soaps, Toothpaste, Vaccines, Antibiotics...

 

Copyright(C) pumpia All Right Reserved .