• High suction lift capabilities
  
• Self-priming
  
• Constant non-pulsating flow
  
• Flow proportional to speed of rotation
  
• Highly simplified drive line without pin joints
  
• Small footprint
  
• Very low noise levels
  
• Stator free expansion
  
  The stator can expand freely according to the operating temperature without running disturbance

• Body :
  Available in either GG25 cast iron or AISI 316L stainless steel
  
• Rotor :
  Depending on the product to be pumped, the rotor can be made of AISI 420 or AISI 316L stainless steel, hard chrome plated if necessary.
  
• Stator :
  Stators are free moulded and available in different materials according to the nature of the product to be handled
  
• Drive shaft :
  The drive shaft is of AISI 420 or AISI 316L stainless steel
  
• Elastic coupling :
  The traditional drive shaft of a MOINEAU pump is replaced by a natural rubber or NBR elastic coupling connecting the drive shaft and the rotor in their rotation.
  
• Shaft sealing :
  Shaft sealing is ensured by a single carbon/stainless steel mechanical seal or, optionally, silicon carbide/alumina.
  

The F series pumps are used in all branches of industry:

• CHEMICAL INDUSTRY
  Detergents, surfactants, dyes, inks, hydrocarbons
  
• MATERIALS INDUSTRY
  Polymer injection, plasticisers, water-based paint
  
• MECHANICAL INDUSTRY
  Machine coolant, cutting oil, used oils (drainage, machine tools effluents,...)
  
• PAPER AND BOARD INDUSTRY
  Flocculents, polymers, water based glues
  
• FOOD AND PERSONAL CARE INDUSTRIES
  Flocculents, formol, lime milk, anti-foaming agents, honey, cosmetic base, liquid soap
  
• ENVIRONMENT
  Flocculents, polyelectrolytes and various polymers...

• Smaller space requirement: the pump is up to 25% shorter than in standard systems.
  
• Simpler maintenance as tasks take less time and are
  easier to perform.
  
• Mechanical parts exposed to much less stress.
  
• Lower replacement part costs as wear parts are smaller
  for 500 or 1000 force-feed pumps.

• Width of standard hopper:
  350 mm for basic models
• Length of standard hopper for concentration
  equipment:
  500 and 1000 mm for basic models
  
• Can be fitted to a conveyor system increasing
  lengths up to 1500, 2000, 2500 and 3000 mm
• Available in 2 or 4 pitch versions

Beside municipal and industrial waste water applications, the
GBB pump can be adapted to handle any highly adherent and
viscous substances and products with large lumps in a wide
variety of fields.

Among these applications we can mention for example bread
dough, offal and carcasses from abattoirs, crushed fishes,
mashed potatoes and vegetables

Of the MOINEAU technology

• High suction lift capabilities
  
• Low shear pumping
  
• Constant non-pulsating flow
  
• Flow proportional to speed of rotation
  
  Of the H series
  
• Flexible rod reducing wear parts
  
• Cartridge mechanical seal
  
• Special design limiting retention area
  
• Cleaning in place
  

Introducing some key features, PCM H series pumps
offer the benefits of a cleanable, versatile
and productive pump

Flexible stainless-steel connecting rod
without pin joints
Reduction of number of wearing parts
Absence of pin joints and joint protection sleeves
High temperature and pressure resistance
Manufactured in accordance with 3A requirements
Cartridge mechanical seal
New generation specially designed for hygienic
applications
Accessibility through the back (drive side)
An optimal location allows ease of cleaning.
Carbon / Ceramic, Silicon Carbide / Silicon Carbide
Single, Single with quench, or Double
Eccentric discharge connection and special
casing
Designed to eliminate potential product retention
AISI 316 L stainless steel
All wetted part are max. Ra 0,8 polished
SMS, DIN, CLAMP connections
CIP flushing connection
Suitable for clean in place process with flushing connection Vertical positioning, left or right tangential
Stators
Compatible with food and cosmetic products between
0 and 90℃ 1, 2 or 4 stages

All PCM H series pumps are manufactured in
accordance with 3A standards. The use of the 3A symbol on dairy equipment assures processors that equipment meets sanitary standards, provides accepted criteria to equipment manufacturers for sanitary design, and establishes guidelines for uniform evaluation and compliance by sanitarians.

• DAIRY PRODUCTS
  Yoghurt, cream, fromage frais, butter, whey, fruit pulp,
  ferments, sugar syrup, fresh cream, caramel...
  
• BEVERAGES
  Beer, fruit preparation, must, wort, flavoring, coloring,
  yeast...
  
• FOODSTUFFS
  Bakery dough, tomato puree, marmalade, mustard, meat
  mix, soup, liquid eggs, gelatine..
  
• SUGAR, STARCH AND DERIVATIVES
  HFCS, glucose syrup, sugar alcohol...
  
• PERSONAL CARE & PHARMACEUTICAL INDUSTRY
  Toothpaste, cream, lotion...
  

• High suction lift capabilities
  
• Self-priming
  
• Constant non-pulsating flow
  
• Flow proportional to speed of rotation
  
• High efficiency
  
• Simple and heavy-duty design
  
•  Low noise levels
  
• Optimal sealing between the rotor and the stator
  
  Every step of the stator manufacturing process is entirely
  controlled by PCM (study, mixing and elastomer injection). The stator profiles are thus optimised to allow for a perfect sealing between the stator and the rotor. As a result, the I series pumps possess particularly high suction lift and pressure capabilities as well as a longer service life.

• Body :
  Available in either GG 25 cast iron or AISI 316L stainless steel.
  
• Rotor :
  Depending on the product to be pumped, the rotor can be made of tempered steel, hard chrome plated stainless steel or carbon steel.
  
• Stator :
  Stators are moulded to metal casings and available in
  different elastomers of various shore hardness ratings.
  
• Shaft sealing :
  Shaft sealing can be accomplished by either packing glands or mechanical seals to suit all duty conditions.

The I series progressing cavity pumps are used in all branches of industry:

• CHEMICAL INDUSTRY
  Acids, silica slurry, emulsions, viscous adhesives
  
• MATERIALS INDUSTRY
  Cement slurry, bentonite, polymers, flotation sludges, limewash, clay slip, iron oxide sludges...
  
• MECHANICAL INDUSTRY Machine tools effluents, cutting oil, water based paints, waste sludges...
  
• PAPER AND BOARD INDUSTRY Calcium carbonate, optical brighteners, bentonite, kaolin, talc, polymers, titanium dioxide, cooked starch
  
• FOOD AND PERSONAL CARE INDUSTRIES
  Molasses, massecuite, potato pulp, frothy starch paste, starch sludge, glucose syrup, crushed grape, vinasse, must, pet food, toothpaste
  
• ENVIRONMENT
  Liquid sludge, polymers, limewash, activated carbon, scum, reagents

• High suction lift capabilities
  
• Self-priming
  
• Constant non-pulsating flow
  
• Flow proportional to speed of rotation
  
• High efficiency
  
• Simple and heavy-duty design
  
• Low noise levels
  
• Optimal sealing between the rotor and the stator
  
  Every step of the stator manufacturing process is entirely controlled by PCM (study, mixing and elastomer injection). The stator profiles are thus optimised to allow for a perfect sealing between the stator and the rotor. As a result, the IVA series pumps possess particularly high suction lift and pressure capabilities as well as a longer service life.
  

• Body :
  Available in either GG25 cast iron or AISI 316L stainless steel.
  
• Rotor :
  Depending on the product to be pumped, the rotor can be made of tempered steel, hard chrome plated AISI 316L stainless steel or carbon steel.
  
• Stator :
  Stators are moulded to metal casings and available in different elastomers of various shore hardness ratings.
  
• Rotating parts :
  Depending on the rotor material and pumped product, rotating parts can be made of steel, AISI 316L stainless steel, AISI 420 stainless steel, with or without chrome plating.
  
• Shaft sealing :
  Shaft sealing can be accomplished by either packing glands or mechanical seals to suit all duty conditions.

The IVA series pumps are used in all branches of industry :

• CHEMICAL INDUSTRY
  High viscosity slurries (bentonite, silica, clay?, emulsions
  
• MATERIALS INDUSTRY
  Various sludges, polyester resins
  
• MECHANICAL INDUSTRY
  Machine tools effluents, cutting oil, water based paints, waste sludges...
  
• FOOD AND PERSONAL CARE INDUSTRIES
  Beet pulp, scums, pet food
  
• ENVIRONMENT
  Thickened sludges (outlet of a mechanical thickener, belt press, centrifuge), dewatered sludges (outlet of dewatering machines, plate press, belt filter press, centrifuge, chamber filter press).

• Self-priming
  
• Constant non-pulsating flow
  
• Easy and fast maintenance
  
• Particularly rugged desig

• Body :
  GG25 cast iron .
  
• Rotor :
  Depending on the model chosen, the rotor can be made of hard chrome plated AISI 316L stainless steel or stainless steel.
  
• Stator :
  Stators are moulded to metal casings and available in different materials.
  
• Shaft sealing :
  Shaft sealing is ensured by a single mechanical seal.
  
• Drive :
  Pumps are driven by a three-phase motor (230/400V, 50Hz, IP55).
  
• Mounting arrangement :
  According to pump models, monobloc or bearing versions are available.